In the entire maintenance process of the guardrail pile driver, the machinery that has been out of service for a long time must be maintained in the correct way, so as to ensure that it will not be affected in any way during the normal use. What should we do for maintenance? Do it?

    1) When parked in a dry room on a flat ground, wooden boards should be laid. Cover it with a cover cloth after parking to avoid various corrosive effects. A phenomenon in which the metal surface and the surrounding medium undergo chemical and electrochemical reactions and are destroyed. Corrosion will not only affect the normal operation of the guardrail pile driver, but also corrode the internal parts of the guardrail pile driver. For example, rainwater and chemical substances in the air enter the inside of the machine through the external passages and gaps of the parts, corrode the inside of the machine parts, accelerate the wear of the machine, and increase the machine failure. Taking measures to prevent the guardrail pile driver from contacting the above substances can effectively extend the service life of the parts.

    2) Clean up the dust and impurities remaining in the mechanical parts. Impurities usually refer to non-metallic substances such as dust and soil, or metal scraps and wear products generated by the construction machinery during use. Once these impurities enter the machine and reach between the mating surfaces of the machine, they are very harmful. They can not only accelerate the wear of the parts, but also scratch the mating surfaces, destroy the lubricant film, increase the temperature of the parts, and deteriorate the lubricant. .

    3) The guardrail pile driver is out of service for a long time and should be stored in the warehouse. The motor should be protected from moisture. The instrument on the control panel should be removed and stored in the box.